# License: AGPL-3.0-or-later WITH Web-Template-Output-Additional-Permission-3.0-or-later
# Use this hook to configure devise mailer, warden hooks and so forth.
# Many of these configuration options can be set straight in your model.
Devise.setup do |config|
	# ==> Mailer Configuration
	# Configure the e-mail address which will be shown in Devise::Mailer,
	# note that it will be overwritten if you use your own mailer class with default "from" parameter.
	config.mailer_sender = Settings.devise.mailer_sender

	# Configure the class responsible to send e-mails.
	# config.mailer = "Devise::Mailer"

	# ==> ORM configuration
	# Load and configure the ORM. Supports :active_record (default) and
	# :mongoid (bson_ext recommended) by default. Other ORMs may be
	# available as additional gems.
	require 'devise/orm/active_record'

	# ==> Configuration for any authentication mechanism
	# Configure which keys are used when authenticating a user. The default is
	# just :email. You can configure it to use [:username, :subdomain], so for
	# authenticating a user, both parameters are required. Remember that those
	# parameters are used only when authenticating and not when retrieving from
	# session. If you need permissions, you should implement that in a before filter.
	# You can also supply a hash where the value is a boolean determining whether
	# or not authentication should be aborted when the value is not present.
	# config.authentication_keys = [ :email ]

	# Configure parameters from the request object used for authentication. Each entry
	# given should be a request method and it will automatically be passed to the
	# find_for_authentication method and considered in your model lookup. For instance,
	# if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
	# The same considerations mentioned for authentication_keys also apply to request_keys.
	# config.request_keys = []

	# Configure which authentication keys should be case-insensitive.
	# These keys will be downcased upon creating or modifying a user and when used
	# to authenticate or find a user. Default is :email.
	config.case_insensitive_keys = [ :email ]

	# Configure which authentication keys should have whitespace stripped.
	# These keys will have whitespace before and after removed upon creating or
	# modifying a user and when used to authenticate or find a user. Default is :email.
	config.strip_whitespace_keys = [ :email ]

	# Tell if authentication through request.params is enabled. True by default.
	# It can be set to an array that will enable params authentication only for the
	# given strategies, for example, `config.params_authenticatable = [:database]` will
	# enable it only for database (email + password) authentication.
	# config.params_authenticatable = true

	# Tell if authentication through HTTP Basic Auth is enabled. False by default.
	# It can be set to an array that will enable http authentication only for the
	# given strategies, for example, `config.http_authenticatable = [:token]` will
	# enable it only for token authentication.
	# config.http_authenticatable = false

	# If http headers should be returned for AJAX requests. True by default.
	# config.http_authenticatable_on_xhr = true

	# The realm used in Http Basic Authentication. "Application" by default.
	# config.http_authentication_realm = "Application"

	# It will change confirmation, password recovery and other workflows
	# to behave the same regardless if the e-mail provided was right or wrong.
	# Does not affect registerable.
	# config.paranoid = true

	# By default Devise will store the user in session. You can skip storage for
	# :http_auth and :token_auth by adding those symbols to the array below.
	# Notice that if you are skipping storage for all authentication paths, you
	# may want to disable generating routes to Devise's sessions controller by
	# passing :skip => :sessions to `devise_for` in your config/routes.rb
	config.skip_session_storage = [:http_auth]

	# ==> Configuration for :database_authenticatable
	# For bcrypt, this is the cost for hashing the password and defaults to 10. If
	# using other encryptors, it sets how many times you want the password re-encrypted.
	#
	# Limiting the stretches to just one in testing will increase the performance of
	# your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
	# a value less than 10 in other environments.
	config.stretches = Rails.env.test? ? 1 : 10


	# ==> Configuration for :confirmable
	# A period that the user is allowed to access the website even without
	# confirming his account. For instance, if set to 2.days, the user will be
	# able to access the website for two days without confirming his account,
	# access will be blocked just in the third day. Default is 0.days, meaning
	# the user cannot access the website without confirming his account.
	# config.allow_unconfirmed_access_for = 2.days

	# If true, requires any email changes to be confirmed (exactly the same way as
	# initial account confirmation) to be applied. Requires additional unconfirmed_email
	# db field (see migrations). Until confirmed new email is stored in
	# unconfirmed email column, and copied to email column on successful confirmation.
	config.reconfirmable = true

	# Defines which key will be used when confirming an account
	# config.confirmation_keys = [ :email ]

	# ==> Configuration for :rememberable
	# The time the user will be remembered without asking for credentials again.
	# config.remember_for = 2.weeks

	# If true, extends the user's remember period when remembered via cookie.
	# config.extend_remember_period = false

	# Options to be passed to the created cookie. For instance, you can set
	# :secure => true in order to force SSL only cookies.
	# config.rememberable_options = {}

	# ==> Configuration for :validatable
	# Range for password length. Default is 6..128.
	# config.password_length = 6..128

	# Email regex used to validate email formats. It simply asserts that
	# an one (and only one) @ exists in the given string. This is mainly
	# to give user feedback and not to assert the e-mail validity.
	# config.email_regexp = /\A[^@]+@[^@]+\z/

	# ==> Configuration for :timeoutable
	# The time you want to timeout the user session without activity. After this
	# time the user will be asked for credentials again. Default is 30 minutes.
	# config.timeout_in = 30.minutes

	# If true, expires auth token on session timeout.
	# config.expire_auth_token_on_timeout = false

	# ==> Configuration for :lockable
	# Defines which strategy will be used to lock an account.
	# :failed_attempts = Locks an account after a number of failed attempts to sign in.
	# :none						 = No lock strategy. You should handle locking by yourself.
	# config.lock_strategy = :failed_attempts

	# Defines which key will be used when locking and unlocking an account
	# config.unlock_keys = [ :email ]

	# Defines which strategy will be used to unlock an account.
	# :email = Sends an unlock link to the user email
	# :time  = Re-enables login after a certain amount of time (see :unlock_in below)
	# :both  = Enables both strategies
	# :none  = No unlock strategy. You should handle unlocking by yourself.
	# config.unlock_strategy = :both

	# Number of authentication tries before locking an account if lock_strategy
	# is failed attempts.
	# config.maximum_attempts = 20

	# Time interval to unlock the account if :time is enabled as unlock_strategy.
	# config.unlock_in = 1.hour

	# ==> Configuration for :recoverable
	#
	# Defines which key will be used when recovering the password for an account
	# config.reset_password_keys = [ :email ]

	# Time interval you can reset your password with a reset password key.
	# Don't put a too small interval or your users won't have the time to
	# change their passwords.
	config.reset_password_within = 6.hours

	# ==> Configuration for :encryptable
	# Allow you to use another encryption algorithm besides bcrypt (default). You can use
	# :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
	# :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
	# and :restful_authentication_sha1 (then you should set stretches to 10, and copy
	# REST_AUTH_SITE_KEY to pepper)
	# config.encryptor = :sha512

	# ==> Configuration for :token_authenticatable
	# Defines name of the authentication token params key
	# config.token_authentication_key = :auth_token

	# ==> Scopes configuration
	# Turn scoped views on. Before rendering "sessions/new", it will first check for
	# "users/sessions/new". It's turned off by default because it's slower if you
	# are using only default views.
	# config.scoped_views = false

	# Configure the default scope given to Warden. By default it's the first
	# devise role declared in your routes (usually :user).
	# config.default_scope = :user

	# Set this configuration to false if you want /users/sign_out to sign out
	# only the current scope. By default, Devise signs out all scopes.
	# config.sign_out_all_scopes = true

	# ==> Navigation configuration
	# Lists the formats that should be treated as navigational. Formats like
	# :html, should redirect to the sign in page when the user does not have
	# access, but formats like :xml or :json, should return 401.
	#
	# If you have any extra navigational formats, like :iphone or :mobile, you
	# should add them to the navigational formats lists.
	#
	# The "*/*" below is required to match Internet Explorer requests.
	# config.navigational_formats = ["*/*", :html]

	# The default HTTP method used to sign out a resource. Default is :delete.
	config.sign_out_via = :get


	config.secret_key = ENV.fetch('DEVISE_SECRET_KEY')

	# ==> Warden configuration
	# If you want to use other strategies, that are not supported by Devise, or
	# change the failure app, you can configure them inside the config.warden block.
	#
	# config.warden do |manager|
	#		manager.intercept_401 = false
	#		manager.default_strategies(:scope => :user).unshift :some_external_strategy
	# end

	# ==> Mountable engine configurations
	# When using Devise inside an engine, let's call it `MyEngine`, and this engine
	# is mountable, there are some extra configurations to be taken into account.
	# The following options are available, assuming the engine is mounted as:
	#
	#			mount MyEngine, at: "/my_engine"
	#
	# The router that invoked `devise_for`, in the example above, would be:
	# config.router_name = :my_engine
	#
	# When using omniauth, Devise cannot automatically set Omniauth path,
	# so you need to do it manually. For the users scope, it would be:
	# config.omniauth_path_prefix = "/my_engine/users/auth"
end