Add log files from the build steps, mention in doc
This commit is contained in:
Denver Gingerich
parent
c36b248e01
commit
573bd70b2f
5 changed files with 357 additions and 1 deletions
|
|
@ -866,7 +866,9 @@ image for your router. It is advised that you use this configuration.
|
|||
** The next instruction was 'Simply running "make" will build your firmware.'
|
||||
So we entered the "librecmc" directory that had been created from the above
|
||||
"tar" command and then ran "make". The build took about 40 minutes to run on
|
||||
our system.
|
||||
our system. The command used and output from running it are available here:
|
||||
|
||||
enforcement-case-studies_log-output/thinkpenguin_librecmc-complete.log
|
||||
|
||||
% FIXME: Above, I'd like to see more ``walk through'' of the step by step
|
||||
% instructions. The text is a bit terse: could be expanded to talk more.
|
||||
|
|
@ -914,17 +916,28 @@ image for your router. It is advised that you use this configuration.
|
|||
|
||||
mips-librecmc-linux-uclibc-gcc.bin: /lib/libc.so.6: version `GLIBC_2.14' not found (required by mips-librecmc-linux-uclibc-gcc.bin)
|
||||
|
||||
The complete log output (including the command used to run it) is here:
|
||||
|
||||
enforcement-case-studies_log-output/thinkpenguin_u-boot-build_fail.log
|
||||
|
||||
* We found that by removing toolchain/bin and symlinking the toolchain built for
|
||||
the filesystem/kernel above in its place, we were able to complete the U-Boot
|
||||
build. Specifically, we symlinked toolchain/bin to:
|
||||
|
||||
../../staging_dir/toolchain-mips_34kc_gcc-4.6-linaro_uClibc-0.9.33.2/bin
|
||||
|
||||
Output from the symlink operation can be found here:
|
||||
|
||||
enforcement-case-studies_log-output/thinkpenguin_u-boot-create_symlink.log
|
||||
|
||||
* Ideally the pre-built toolchain binaries should not be included and a symlink
|
||||
as mentioned above should be created by default, with a mention that the
|
||||
U-Boot build depends on the previous build for its toolchain.
|
||||
* After compilation completed successfully, we found a new U-Boot image in the
|
||||
bin directory. The instructions explained how to install it on the device.
|
||||
Output from the successful build (after the symlink was created) is here:
|
||||
|
||||
enforcement-case-studies_log-output/thinkpenguin_u-boot-finish_build.log
|
||||
|
||||
\section{Installation}
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,201 @@
|
|||
denver@cherry:~/thinkpenguin/extract/librecmc$ TMPDATE=`date`; time make; echo $?; echo "$TMPDATE"; date
|
||||
Collecting package info: done
|
||||
Collecting target info: done
|
||||
Checking 'working-make'... ok.
|
||||
Checking 'case-sensitive-fs'... ok.
|
||||
Checking 'getopt'... ok.
|
||||
Checking 'fileutils'... ok.
|
||||
Checking 'working-gcc'... ok.
|
||||
Checking 'working-g++'... ok.
|
||||
Checking 'ncurses'... ok.
|
||||
Checking 'zlib'... ok.
|
||||
Checking 'gawk'... ok.
|
||||
Checking 'unzip'... ok.
|
||||
Checking 'bzip2'... ok.
|
||||
Checking 'perl'... ok.
|
||||
Checking '/usr/bin/python'... ok.
|
||||
Checking 'wget'... ok.
|
||||
Checking 'git'... ok.
|
||||
Checking 'gnutar'... ok.
|
||||
Checking 'svn'... ok.
|
||||
Checking 'openssl'... ok.
|
||||
Checking 'gnu-find'... ok.
|
||||
Checking 'getopt-extended'... ok.
|
||||
Checking 'non-root'... ok.
|
||||
make[1] world
|
||||
make[2] tools/install
|
||||
make[3] -C tools/patch compile
|
||||
make[3] -C tools/patch install
|
||||
make[3] -C tools/m4 compile
|
||||
make[3] -C tools/m4 install
|
||||
make[3] -C tools/sed compile
|
||||
make[3] -C tools/sed install
|
||||
make[3] -C tools/libtool compile
|
||||
make[3] -C tools/libtool install
|
||||
make[3] -C tools/autoconf compile
|
||||
make[3] -C tools/autoconf install
|
||||
make[3] -C tools/pkg-config compile
|
||||
make[3] -C tools/pkg-config install
|
||||
make[3] -C tools/xz compile
|
||||
make[3] -C tools/xz install
|
||||
make[3] -C tools/automake compile
|
||||
make[3] -C tools/automake install
|
||||
make[3] -C tools/gmp compile
|
||||
make[3] -C tools/gmp install
|
||||
make[3] -C tools/mpfr compile
|
||||
make[3] -C tools/mpfr install
|
||||
make[3] -C tools/mpc compile
|
||||
make[3] -C tools/mpc install
|
||||
make[3] -C tools/libelf compile
|
||||
make[3] -C tools/libelf install
|
||||
make[3] -C tools/flex compile
|
||||
make[3] -C tools/flex install
|
||||
make[3] -C tools/bison compile
|
||||
make[3] -C tools/bison install
|
||||
make[3] -C tools/mklibs compile
|
||||
make[3] -C tools/mklibs install
|
||||
make[3] -C tools/sstrip compile
|
||||
make[3] -C tools/sstrip install
|
||||
make[3] -C tools/ipkg-utils compile
|
||||
make[3] -C tools/ipkg-utils install
|
||||
make[3] -C tools/genext2fs compile
|
||||
make[3] -C tools/genext2fs install
|
||||
make[3] -C tools/e2fsprogs compile
|
||||
make[3] -C tools/e2fsprogs install
|
||||
make[3] -C tools/mtd-utils compile
|
||||
make[3] -C tools/mtd-utils install
|
||||
make[3] -C tools/mkimage compile
|
||||
make[3] -C tools/mkimage install
|
||||
make[3] -C tools/firmware-utils compile
|
||||
make[3] -C tools/firmware-utils install
|
||||
make[3] -C tools/patch-image compile
|
||||
make[3] -C tools/patch-image install
|
||||
make[3] -C tools/findutils compile
|
||||
make[3] -C tools/findutils install
|
||||
make[3] -C tools/quilt compile
|
||||
make[3] -C tools/quilt install
|
||||
make[3] -C tools/yaffs2 compile
|
||||
make[3] -C tools/yaffs2 install
|
||||
make[3] -C tools/flock compile
|
||||
make[3] -C tools/flock install
|
||||
make[3] -C tools/padjffs2 compile
|
||||
make[3] -C tools/padjffs2 install
|
||||
make[3] -C tools/mm-macros compile
|
||||
make[3] -C tools/mm-macros install
|
||||
make[3] -C tools/xorg-macros compile
|
||||
make[3] -C tools/xorg-macros install
|
||||
make[3] -C tools/xfce-macros compile
|
||||
make[3] -C tools/xfce-macros install
|
||||
make[3] -C tools/missing-macros compile
|
||||
make[3] -C tools/missing-macros install
|
||||
make[3] -C tools/cmake compile
|
||||
make[3] -C tools/cmake install
|
||||
make[3] -C tools/scons compile
|
||||
make[3] -C tools/scons install
|
||||
make[3] -C tools/bc compile
|
||||
make[3] -C tools/bc install
|
||||
make[3] -C tools/lzma-old compile
|
||||
make[3] -C tools/lzma-old install
|
||||
make[3] -C tools/squashfs compile
|
||||
make[3] -C tools/squashfs install
|
||||
make[3] -C tools/lzma compile
|
||||
make[3] -C tools/lzma install
|
||||
make[3] -C tools/squashfs4 compile
|
||||
make[3] -C tools/squashfs4 install
|
||||
make[2] toolchain/install
|
||||
make[3] -C toolchain/gdb prepare
|
||||
make[3] -C toolchain/gdb compile
|
||||
make[3] -C toolchain/gdb install
|
||||
make[3] -C toolchain/binutils prepare
|
||||
make[3] -C toolchain/binutils compile
|
||||
make[3] -C toolchain/binutils install
|
||||
make[3] -C toolchain/gcc/minimal prepare
|
||||
make[3] -C toolchain/gcc/minimal compile
|
||||
make[3] -C toolchain/gcc/minimal install
|
||||
make[3] -C toolchain/kernel-headers prepare
|
||||
make[3] -C toolchain/kernel-headers compile
|
||||
make[3] -C toolchain/kernel-headers install
|
||||
make[3] -C toolchain/uClibc/headers prepare
|
||||
make[3] -C toolchain/uClibc/headers compile
|
||||
make[3] -C toolchain/uClibc/headers install
|
||||
make[3] -C toolchain/gcc/initial prepare
|
||||
make[3] -C toolchain/gcc/initial compile
|
||||
make[3] -C toolchain/gcc/initial install
|
||||
make[3] -C toolchain/uClibc prepare
|
||||
make[3] -C toolchain/uClibc compile
|
||||
make[3] -C toolchain/uClibc install
|
||||
make[3] -C toolchain/gcc/final prepare
|
||||
make[3] -C toolchain/gcc/final compile
|
||||
make[3] -C toolchain/gcc/final install
|
||||
make[3] -C toolchain/uClibc/utils prepare
|
||||
make[3] -C toolchain/uClibc/utils compile
|
||||
make[3] -C toolchain/uClibc/utils install
|
||||
make[2] target/compile
|
||||
make[3] -C target/linux compile
|
||||
make[2] package/cleanup
|
||||
make[2] package/compile
|
||||
make[3] -C package/libs/toolchain compile
|
||||
make[3] -C package/libs/libnl-tiny compile
|
||||
make[3] -C package/libs/libjson-c compile
|
||||
make[3] -C package/utils/lua compile
|
||||
make[3] -C package/libs/libubox compile
|
||||
make[3] -C package/system/ubus compile
|
||||
make[3] -C package/system/uci compile
|
||||
make[3] -C package/network/config/netifd compile
|
||||
make[3] -C package/system/opkg host-compile
|
||||
make[3] -C package/system/ubox compile
|
||||
make[3] -C package/system/procd compile
|
||||
make[3] -C package/base-files compile
|
||||
make[3] -C package/boot/uboot-envtools compile
|
||||
make[3] -C package/kernel/gpio-button-hotplug compile
|
||||
make[3] -C package/kernel/linux compile
|
||||
make[3] -C package/network/services/hostapd compile
|
||||
make[3] -C package/network/utils/iw compile
|
||||
make[3] -C package/kernel/mac80211 compile
|
||||
make[3] -C package/libs/gettext compile
|
||||
make[3] -C package/libs/libiconv compile
|
||||
make[3] -C package/libs/libtool compile
|
||||
make[3] -C package/libs/cyassl compile
|
||||
make[3] -C package/libs/ocf-crypto-headers compile
|
||||
make[3] -C package/libs/zlib compile
|
||||
make[3] -C package/libs/openssl compile
|
||||
make[3] -C package/libs/polarssl compile
|
||||
make[3] -C package/libs/ustream-ssl compile
|
||||
make[3] -C package/luci/contrib/package/freifunk-common compile
|
||||
make[3] -C package/network/utils/iptables compile
|
||||
make[3] -C package/network/config/firewall compile
|
||||
make[3] -C package/network/utils/iproute2 compile
|
||||
make[3] -C package/luci/contrib/package/freifunk-gwcheck compile
|
||||
make[3] -C package/luci/contrib/package/freifunk-mapupdate compile
|
||||
make[3] -C package/network/services/uhttpd compile
|
||||
make[3] -C package/network/utils/iwinfo compile
|
||||
make[3] -C package/utils/lua host-compile
|
||||
make[3] -C package/utils/px5g compile
|
||||
make[3] -C package/network/services/relayd compile
|
||||
make[3] -C package/luci/contrib/package/luci compile
|
||||
make[3] -C package/network/config/swconfig compile
|
||||
make[3] -C package/network/ipv6/odhcp6c compile
|
||||
make[3] -C package/network/services/dnsmasq compile
|
||||
make[3] -C package/network/services/dropbear compile
|
||||
make[3] -C package/network/services/odhcpd compile
|
||||
make[3] -C package/libs/libpcap compile
|
||||
make[3] -C package/network/utils/linux-atm compile
|
||||
make[3] -C package/network/utils/resolveip compile
|
||||
make[3] -C package/network/services/ppp compile
|
||||
make[3] -C package/system/mtd compile
|
||||
make[3] -C package/system/opkg compile
|
||||
make[3] -C package/utils/busybox compile
|
||||
make[2] package/install
|
||||
make[3] package/preconfig
|
||||
make[2] target/install
|
||||
make[3] -C target/linux install
|
||||
make[3] -C target/toolchain install
|
||||
make[2] package/index
|
||||
|
||||
real 38m37.344s
|
||||
user 30m46.725s
|
||||
sys 6m33.225s
|
||||
0
|
||||
Fri Oct 17 09:44:56 EDT 2014
|
||||
Fri Oct 17 10:23:34 EDT 2014
|
||||
denver@cherry:~/thinkpenguin/extract/librecmc$
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$ TMPDATE=`date`; time make tplink_wr841n_v8; echo $?; echo "$TMPDATE"; date
|
||||
======= Configuring for TP-Link TL-WR841N/D v8 at: Fri Oct 17 11:22:10 EDT 2014 =======
|
||||
mips-librecmc-linux-uclibc-gcc.bin: /lib/libc.so.6: version `GLIBC_2.14' not found (required by mips-librecmc-linux-uclibc-gcc.bin)
|
||||
Makefile:219: warning: overriding commands for target `board/ar7240/db12x/libdb12x.a'
|
||||
Makefile:188: warning: ignoring old commands for target `board/ar7240/db12x/libdb12x.a'
|
||||
Makefile:219: warning: overriding commands for target `cpu/mips/libmips.a'
|
||||
Makefile:188: warning: ignoring old commands for target `cpu/mips/libmips.a'
|
||||
Makefile:219: warning: overriding commands for target `cpu/mips/ar7240/libar7240.a'
|
||||
Makefile:188: warning: ignoring old commands for target `cpu/mips/ar7240/libar7240.a'
|
||||
mips-librecmc-linux-uclibc-gcc.bin: /lib/libc.so.6: version `GLIBC_2.14' not found (required by mips-librecmc-linux-uclibc-gcc.bin)
|
||||
mips-librecmc-linux-uclibc-gcc.bin: /lib/libc.so.6: version `GLIBC_2.14' not found (required by mips-librecmc-linux-uclibc-gcc.bin)
|
||||
make[2]: *** No rule to make target `.depend'. Stop.
|
||||
make[1]: *** [depend] Error 2
|
||||
make: *** [tplink_wr841n_v8] Error 2
|
||||
|
||||
real 0m0.070s
|
||||
user 0m0.017s
|
||||
sys 0m0.061s
|
||||
2
|
||||
Fri Oct 17 11:22:10 EDT 2014
|
||||
Fri Oct 17 11:22:10 EDT 2014
|
||||
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$
|
||||
|
|
@ -0,0 +1,4 @@
|
|||
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$ mv toolchain/bin toolchain/old_bin
|
||||
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$ cd toolchain/
|
||||
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot/toolchain$ ln -s ../../librecmc/staging_dir/toolchain-mips_34kc_gcc-4.6-linaro_uClibc-0.9.33.2/bin .
|
||||
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot/toolchain$
|
||||
|
|
@ -0,0 +1,116 @@
|
|||
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$ TMPDATE=`date`; time make tplink_wr841n_v8; echo $?; echo "$TMPDATE"; date
|
||||
Makefile:219: warning: overriding commands for target `board/ar7240/db12x/libdb12x.a'
|
||||
Makefile:188: warning: ignoring old commands for target `board/ar7240/db12x/libdb12x.a'
|
||||
Makefile:219: warning: overriding commands for target `cpu/mips/libmips.a'
|
||||
Makefile:188: warning: ignoring old commands for target `cpu/mips/libmips.a'
|
||||
Makefile:219: warning: overriding commands for target `cpu/mips/ar7240/libar7240.a'
|
||||
Makefile:188: warning: ignoring old commands for target `cpu/mips/ar7240/libar7240.a'
|
||||
======= Configuring for TP-Link TL-WR841N/D v8 at: Fri Oct 17 11:29:30 EDT 2014 =======
|
||||
Makefile:219: warning: overriding commands for target `board/ar7240/db12x/libdb12x.a'
|
||||
Makefile:188: warning: ignoring old commands for target `board/ar7240/db12x/libdb12x.a'
|
||||
Makefile:219: warning: overriding commands for target `cpu/mips/libmips.a'
|
||||
Makefile:188: warning: ignoring old commands for target `cpu/mips/libmips.a'
|
||||
Makefile:219: warning: overriding commands for target `cpu/mips/ar7240/libar7240.a'
|
||||
Makefile:188: warning: ignoring old commands for target `cpu/mips/ar7240/libar7240.a'
|
||||
a - crc32.o
|
||||
a - ctype.o
|
||||
a - display_options.o
|
||||
a - ldiv.o
|
||||
a - string.o
|
||||
a - vsprintf.o
|
||||
a - LzmaWrapper.o
|
||||
a - LzmaDecode.o
|
||||
a - main.o
|
||||
a - cmd_bootm.o
|
||||
a - cmd_boot.o
|
||||
a - cmd_flash.o
|
||||
a - cmd_mem.o
|
||||
a - cmd_custom.o
|
||||
a - cmd_net.o
|
||||
a - cmd_nvedit.o
|
||||
a - cmd_itest.o
|
||||
a - command.o
|
||||
a - console.o
|
||||
a - devices.o
|
||||
a - dlmalloc.o
|
||||
a - environment.o
|
||||
a - env_common.o
|
||||
a - env_nowhere.o
|
||||
a - exports.o
|
||||
a - flash.o
|
||||
a - lists.o
|
||||
a - env_flash.o
|
||||
a - hush.o
|
||||
a - db12x.o
|
||||
a - ../common/ar7240_pci.o
|
||||
a - ../common/ar7240_flash.o
|
||||
a - ../common/athrs27_phy.o
|
||||
a - ../common/lowlevel_init_934x.o
|
||||
a - cpu.o
|
||||
a - cache.o
|
||||
meminit.c: In function 'wasp_ddr_initial_config':
|
||||
meminit.c:242:2: warning: 'type' may be used uninitialized in this function [-Wuninitialized]
|
||||
meminit.c:205:2: warning: 'tap_val' may be used uninitialized in this function [-Wuninitialized]
|
||||
meminit.c:223:2: warning: 'cycle_val' may be used uninitialized in this function [-Wuninitialized]
|
||||
meminit.c:186:3: warning: 'ext_mod' may be used uninitialized in this function [-Wuninitialized]
|
||||
meminit.c:164:2: warning: 'ddr_config2' may be used uninitialized in this function [-Wuninitialized]
|
||||
meminit.c:161:2: warning: 'ddr_config' may be used uninitialized in this function [-Wuninitialized]
|
||||
ar7240_serial.c: In function 'ar7240_sys_frequency':
|
||||
ar7240_serial.c:51:52: warning: unused variable 'frac' [-Wunused-variable]
|
||||
ar7240_serial.c:51:45: warning: unused variable 'nfrac' [-Wunused-variable]
|
||||
a - meminit.o
|
||||
a - ar7240_serial.o
|
||||
a - ag934x.o
|
||||
a - board.o
|
||||
a - time.o
|
||||
a - mips_linux.o
|
||||
a - netconsole.o
|
||||
a - pci.o
|
||||
a - net.o
|
||||
a - tftp.o
|
||||
a - rarp.o
|
||||
a - eth.o
|
||||
a - bootp.o
|
||||
a - sntp.o
|
||||
a - httpd.o
|
||||
a - date.o
|
||||
a - uip.o
|
||||
a - uip_arch.o
|
||||
a - uip_arp.o
|
||||
a - httpd.o
|
||||
a - fs.o
|
||||
a - bootstrap_board.o
|
||||
a - LzmaDecode.o
|
||||
a - string.o
|
||||
a - crc32.o
|
||||
a - LzmaWrapper.o
|
||||
a - time.o
|
||||
Image Name: u-boot image
|
||||
Created: Fri Oct 17 11:29:34 2014
|
||||
Image Type: MIPS Linux Firmware (lzma compressed)
|
||||
Data Size: 48569 Bytes = 47.43 kB = 0.05 MB
|
||||
Load Address: 0x80010000
|
||||
Entry Point: 0x80010000
|
||||
make[1]: Entering directory `/home/denver/thinkpenguin/extract/librecmc-u-boot'
|
||||
|
||||
======= Preparing 64KB file filled with 0xFF... =======
|
||||
64+0 records in
|
||||
128+0 records out
|
||||
65536 bytes (66 kB) copied, 0.000202628 s, 323 MB/s
|
||||
|
||||
======= Copying U-Boot image... =======
|
||||
123+1 records in
|
||||
123+1 records out
|
||||
63305 bytes (63 kB) copied, 0.000114554 s, 553 MB/s
|
||||
|
||||
======= U-Boot image ready, size: 65536 bytes =======
|
||||
|
||||
make[1]: Leaving directory `/home/denver/thinkpenguin/extract/librecmc-u-boot'
|
||||
|
||||
real 0m3.658s
|
||||
user 0m2.643s
|
||||
sys 0m1.052s
|
||||
0
|
||||
Fri Oct 17 11:29:30 EDT 2014
|
||||
Fri Oct 17 11:29:34 EDT 2014
|
||||
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$
|
||||
Loading…
Reference in a new issue