Copyleft/guide
6
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Add log files from the build steps, mention in doc

Browse source
This commit is contained in:
Denver Gingerich 2014-11-02 12:41:25 -05:00
parent c36b248e01
commit 573bd70b2f
5 changed files with 357 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

15
enforcement-case-studies.tex
View file

@ -866,7 +866,9 @@ image for your router. It is advised that you use this configuration.
** The next instruction was 'Simply running "make" will build your firmware.'
So we entered the "librecmc" directory that had been created from the above
"tar" command and then ran "make". The build took about 40 minutes to run on
our system.
our system. The command used and output from running it are available here:
enforcement-case-studies_log-output/thinkpenguin_librecmc-complete.log
% FIXME: Above, I'd like to see more ``walk through'' of the step by step
% instructions. The text is a bit terse: could be expanded to talk more.
@ -914,17 +916,28 @@ image for your router. It is advised that you use this configuration.
mips-librecmc-linux-uclibc-gcc.bin: /lib/libc.so.6: version `GLIBC_2.14' not found (required by mips-librecmc-linux-uclibc-gcc.bin)
The complete log output (including the command used to run it) is here:
enforcement-case-studies_log-output/thinkpenguin_u-boot-build_fail.log
* We found that by removing toolchain/bin and symlinking the toolchain built for
the filesystem/kernel above in its place, we were able to complete the U-Boot
build. Specifically, we symlinked toolchain/bin to:
../../staging_dir/toolchain-mips_34kc_gcc-4.6-linaro_uClibc-0.9.33.2/bin
Output from the symlink operation can be found here:
enforcement-case-studies_log-output/thinkpenguin_u-boot-create_symlink.log
* Ideally the pre-built toolchain binaries should not be included and a symlink
as mentioned above should be created by default, with a mention that the
U-Boot build depends on the previous build for its toolchain.
* After compilation completed successfully, we found a new U-Boot image in the
bin directory. The instructions explained how to install it on the device.
Output from the successful build (after the symlink was created) is here:
enforcement-case-studies_log-output/thinkpenguin_u-boot-finish_build.log
\section{Installation}

201
enforcement-case-studies_log-output/thinkpenguin_librecmc-complete.log Normal file
View file

@ -0,0 +1,201 @@
denver@cherry:~/thinkpenguin/extract/librecmc$ TMPDATE=`date`; time make; echo $?; echo "$TMPDATE"; date
Collecting package info: done
Collecting target info: done
Checking 'working-make'... ok.
Checking 'case-sensitive-fs'... ok.
Checking 'getopt'... ok.
Checking 'fileutils'... ok.
Checking 'working-gcc'... ok.
Checking 'working-g++'... ok.
Checking 'ncurses'... ok.
Checking 'zlib'... ok.
Checking 'gawk'... ok.
Checking 'unzip'... ok.
Checking 'bzip2'... ok.
Checking 'perl'... ok.
Checking '/usr/bin/python'... ok.
Checking 'wget'... ok.
Checking 'git'... ok.
Checking 'gnutar'... ok.
Checking 'svn'... ok.
Checking 'openssl'... ok.
Checking 'gnu-find'... ok.
Checking 'getopt-extended'... ok.
Checking 'non-root'... ok.
make[1] world
make[2] tools/install
make[3] -C tools/patch compile
make[3] -C tools/patch install
make[3] -C tools/m4 compile
make[3] -C tools/m4 install
make[3] -C tools/sed compile
make[3] -C tools/sed install
make[3] -C tools/libtool compile
make[3] -C tools/libtool install
make[3] -C tools/autoconf compile
make[3] -C tools/autoconf install
make[3] -C tools/pkg-config compile
make[3] -C tools/pkg-config install
make[3] -C tools/xz compile
make[3] -C tools/xz install
make[3] -C tools/automake compile
make[3] -C tools/automake install
make[3] -C tools/gmp compile
make[3] -C tools/gmp install
make[3] -C tools/mpfr compile
make[3] -C tools/mpfr install
make[3] -C tools/mpc compile
make[3] -C tools/mpc install
make[3] -C tools/libelf compile
make[3] -C tools/libelf install
make[3] -C tools/flex compile
make[3] -C tools/flex install
make[3] -C tools/bison compile
make[3] -C tools/bison install
make[3] -C tools/mklibs compile
make[3] -C tools/mklibs install
make[3] -C tools/sstrip compile
make[3] -C tools/sstrip install
make[3] -C tools/ipkg-utils compile
make[3] -C tools/ipkg-utils install
make[3] -C tools/genext2fs compile
make[3] -C tools/genext2fs install
make[3] -C tools/e2fsprogs compile
make[3] -C tools/e2fsprogs install
make[3] -C tools/mtd-utils compile
make[3] -C tools/mtd-utils install
make[3] -C tools/mkimage compile
make[3] -C tools/mkimage install
make[3] -C tools/firmware-utils compile
make[3] -C tools/firmware-utils install
make[3] -C tools/patch-image compile
make[3] -C tools/patch-image install
make[3] -C tools/findutils compile
make[3] -C tools/findutils install
make[3] -C tools/quilt compile
make[3] -C tools/quilt install
make[3] -C tools/yaffs2 compile
make[3] -C tools/yaffs2 install
make[3] -C tools/flock compile
make[3] -C tools/flock install
make[3] -C tools/padjffs2 compile
make[3] -C tools/padjffs2 install
make[3] -C tools/mm-macros compile
make[3] -C tools/mm-macros install
make[3] -C tools/xorg-macros compile
make[3] -C tools/xorg-macros install
make[3] -C tools/xfce-macros compile
make[3] -C tools/xfce-macros install
make[3] -C tools/missing-macros compile
make[3] -C tools/missing-macros install
make[3] -C tools/cmake compile
make[3] -C tools/cmake install
make[3] -C tools/scons compile
make[3] -C tools/scons install
make[3] -C tools/bc compile
make[3] -C tools/bc install
make[3] -C tools/lzma-old compile
make[3] -C tools/lzma-old install
make[3] -C tools/squashfs compile
make[3] -C tools/squashfs install
make[3] -C tools/lzma compile
make[3] -C tools/lzma install
make[3] -C tools/squashfs4 compile
make[3] -C tools/squashfs4 install
make[2] toolchain/install
make[3] -C toolchain/gdb prepare
make[3] -C toolchain/gdb compile
make[3] -C toolchain/gdb install
make[3] -C toolchain/binutils prepare
make[3] -C toolchain/binutils compile
make[3] -C toolchain/binutils install
make[3] -C toolchain/gcc/minimal prepare
make[3] -C toolchain/gcc/minimal compile
make[3] -C toolchain/gcc/minimal install
make[3] -C toolchain/kernel-headers prepare
make[3] -C toolchain/kernel-headers compile
make[3] -C toolchain/kernel-headers install
make[3] -C toolchain/uClibc/headers prepare
make[3] -C toolchain/uClibc/headers compile
make[3] -C toolchain/uClibc/headers install
make[3] -C toolchain/gcc/initial prepare
make[3] -C toolchain/gcc/initial compile
make[3] -C toolchain/gcc/initial install
make[3] -C toolchain/uClibc prepare
make[3] -C toolchain/uClibc compile
make[3] -C toolchain/uClibc install
make[3] -C toolchain/gcc/final prepare
make[3] -C toolchain/gcc/final compile
make[3] -C toolchain/gcc/final install
make[3] -C toolchain/uClibc/utils prepare
make[3] -C toolchain/uClibc/utils compile
make[3] -C toolchain/uClibc/utils install
make[2] target/compile
make[3] -C target/linux compile
make[2] package/cleanup
make[2] package/compile
make[3] -C package/libs/toolchain compile
make[3] -C package/libs/libnl-tiny compile
make[3] -C package/libs/libjson-c compile
make[3] -C package/utils/lua compile
make[3] -C package/libs/libubox compile
make[3] -C package/system/ubus compile
make[3] -C package/system/uci compile
make[3] -C package/network/config/netifd compile
make[3] -C package/system/opkg host-compile
make[3] -C package/system/ubox compile
make[3] -C package/system/procd compile
make[3] -C package/base-files compile
make[3] -C package/boot/uboot-envtools compile
make[3] -C package/kernel/gpio-button-hotplug compile
make[3] -C package/kernel/linux compile
make[3] -C package/network/services/hostapd compile
make[3] -C package/network/utils/iw compile
make[3] -C package/kernel/mac80211 compile
make[3] -C package/libs/gettext compile
make[3] -C package/libs/libiconv compile
make[3] -C package/libs/libtool compile
make[3] -C package/libs/cyassl compile
make[3] -C package/libs/ocf-crypto-headers compile
make[3] -C package/libs/zlib compile
make[3] -C package/libs/openssl compile
make[3] -C package/libs/polarssl compile
make[3] -C package/libs/ustream-ssl compile
make[3] -C package/luci/contrib/package/freifunk-common compile
make[3] -C package/network/utils/iptables compile
make[3] -C package/network/config/firewall compile
make[3] -C package/network/utils/iproute2 compile
make[3] -C package/luci/contrib/package/freifunk-gwcheck compile
make[3] -C package/luci/contrib/package/freifunk-mapupdate compile
make[3] -C package/network/services/uhttpd compile
make[3] -C package/network/utils/iwinfo compile
make[3] -C package/utils/lua host-compile
make[3] -C package/utils/px5g compile
make[3] -C package/network/services/relayd compile
make[3] -C package/luci/contrib/package/luci compile
make[3] -C package/network/config/swconfig compile
make[3] -C package/network/ipv6/odhcp6c compile
make[3] -C package/network/services/dnsmasq compile
make[3] -C package/network/services/dropbear compile
make[3] -C package/network/services/odhcpd compile
make[3] -C package/libs/libpcap compile
make[3] -C package/network/utils/linux-atm compile
make[3] -C package/network/utils/resolveip compile
make[3] -C package/network/services/ppp compile
make[3] -C package/system/mtd compile
make[3] -C package/system/opkg compile
make[3] -C package/utils/busybox compile
make[2] package/install
make[3] package/preconfig
make[2] target/install
make[3] -C target/linux install
make[3] -C target/toolchain install
make[2] package/index
real 38m37.344s
user 30m46.725s
sys 6m33.225s
0
Fri Oct 17 09:44:56 EDT 2014
Fri Oct 17 10:23:34 EDT 2014
denver@cherry:~/thinkpenguin/extract/librecmc$

22
enforcement-case-studies_log-output/thinkpenguin_u-boot-build_fail.log Normal file
View file

@ -0,0 +1,22 @@
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$ TMPDATE=`date`; time make tplink_wr841n_v8; echo $?; echo "$TMPDATE"; date
======= Configuring for TP-Link TL-WR841N/D v8 at: Fri Oct 17 11:22:10 EDT 2014 =======
mips-librecmc-linux-uclibc-gcc.bin: /lib/libc.so.6: version `GLIBC_2.14' not found (required by mips-librecmc-linux-uclibc-gcc.bin)
Makefile:219: warning: overriding commands for target `board/ar7240/db12x/libdb12x.a'
Makefile:188: warning: ignoring old commands for target `board/ar7240/db12x/libdb12x.a'
Makefile:219: warning: overriding commands for target `cpu/mips/libmips.a'
Makefile:188: warning: ignoring old commands for target `cpu/mips/libmips.a'
Makefile:219: warning: overriding commands for target `cpu/mips/ar7240/libar7240.a'
Makefile:188: warning: ignoring old commands for target `cpu/mips/ar7240/libar7240.a'
mips-librecmc-linux-uclibc-gcc.bin: /lib/libc.so.6: version `GLIBC_2.14' not found (required by mips-librecmc-linux-uclibc-gcc.bin)
mips-librecmc-linux-uclibc-gcc.bin: /lib/libc.so.6: version `GLIBC_2.14' not found (required by mips-librecmc-linux-uclibc-gcc.bin)
make[2]: *** No rule to make target `.depend'. Stop.
make[1]: *** [depend] Error 2
make: *** [tplink_wr841n_v8] Error 2
real 0m0.070s
user 0m0.017s
sys 0m0.061s
2
Fri Oct 17 11:22:10 EDT 2014
Fri Oct 17 11:22:10 EDT 2014
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$

4
enforcement-case-studies_log-output/thinkpenguin_u-boot-create_symlink.log Normal file
View file

@ -0,0 +1,4 @@
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$ mv toolchain/bin toolchain/old_bin
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$ cd toolchain/
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot/toolchain$ ln -s ../../librecmc/staging_dir/toolchain-mips_34kc_gcc-4.6-linaro_uClibc-0.9.33.2/bin .
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot/toolchain$

116
enforcement-case-studies_log-output/thinkpenguin_u-boot-finish_build.log Normal file
View file

@ -0,0 +1,116 @@
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$ TMPDATE=`date`; time make tplink_wr841n_v8; echo $?; echo "$TMPDATE"; date
Makefile:219: warning: overriding commands for target `board/ar7240/db12x/libdb12x.a'
Makefile:188: warning: ignoring old commands for target `board/ar7240/db12x/libdb12x.a'
Makefile:219: warning: overriding commands for target `cpu/mips/libmips.a'
Makefile:188: warning: ignoring old commands for target `cpu/mips/libmips.a'
Makefile:219: warning: overriding commands for target `cpu/mips/ar7240/libar7240.a'
Makefile:188: warning: ignoring old commands for target `cpu/mips/ar7240/libar7240.a'
======= Configuring for TP-Link TL-WR841N/D v8 at: Fri Oct 17 11:29:30 EDT 2014 =======
Makefile:219: warning: overriding commands for target `board/ar7240/db12x/libdb12x.a'
Makefile:188: warning: ignoring old commands for target `board/ar7240/db12x/libdb12x.a'
Makefile:219: warning: overriding commands for target `cpu/mips/libmips.a'
Makefile:188: warning: ignoring old commands for target `cpu/mips/libmips.a'
Makefile:219: warning: overriding commands for target `cpu/mips/ar7240/libar7240.a'
Makefile:188: warning: ignoring old commands for target `cpu/mips/ar7240/libar7240.a'
a - crc32.o
a - ctype.o
a - display_options.o
a - ldiv.o
a - string.o
a - vsprintf.o
a - LzmaWrapper.o
a - LzmaDecode.o
a - main.o
a - cmd_bootm.o
a - cmd_boot.o
a - cmd_flash.o
a - cmd_mem.o
a - cmd_custom.o
a - cmd_net.o
a - cmd_nvedit.o
a - cmd_itest.o
a - command.o
a - console.o
a - devices.o
a - dlmalloc.o
a - environment.o
a - env_common.o
a - env_nowhere.o
a - exports.o
a - flash.o
a - lists.o
a - env_flash.o
a - hush.o
a - db12x.o
a - ../common/ar7240_pci.o
a - ../common/ar7240_flash.o
a - ../common/athrs27_phy.o
a - ../common/lowlevel_init_934x.o
a - cpu.o
a - cache.o
meminit.c: In function 'wasp_ddr_initial_config':
meminit.c:242:2: warning: 'type' may be used uninitialized in this function [-Wuninitialized]
meminit.c:205:2: warning: 'tap_val' may be used uninitialized in this function [-Wuninitialized]
meminit.c:223:2: warning: 'cycle_val' may be used uninitialized in this function [-Wuninitialized]
meminit.c:186:3: warning: 'ext_mod' may be used uninitialized in this function [-Wuninitialized]
meminit.c:164:2: warning: 'ddr_config2' may be used uninitialized in this function [-Wuninitialized]
meminit.c:161:2: warning: 'ddr_config' may be used uninitialized in this function [-Wuninitialized]
ar7240_serial.c: In function 'ar7240_sys_frequency':
ar7240_serial.c:51:52: warning: unused variable 'frac' [-Wunused-variable]
ar7240_serial.c:51:45: warning: unused variable 'nfrac' [-Wunused-variable]
a - meminit.o
a - ar7240_serial.o
a - ag934x.o
a - board.o
a - time.o
a - mips_linux.o
a - netconsole.o
a - pci.o
a - net.o
a - tftp.o
a - rarp.o
a - eth.o
a - bootp.o
a - sntp.o
a - httpd.o
a - date.o
a - uip.o
a - uip_arch.o
a - uip_arp.o
a - httpd.o
a - fs.o
a - bootstrap_board.o
a - LzmaDecode.o
a - string.o
a - crc32.o
a - LzmaWrapper.o
a - time.o
Image Name: u-boot image
Created: Fri Oct 17 11:29:34 2014
Image Type: MIPS Linux Firmware (lzma compressed)
Data Size: 48569 Bytes = 47.43 kB = 0.05 MB
Load Address: 0x80010000
Entry Point: 0x80010000
make[1]: Entering directory `/home/denver/thinkpenguin/extract/librecmc-u-boot'
======= Preparing 64KB file filled with 0xFF... =======
64+0 records in
128+0 records out
65536 bytes (66 kB) copied, 0.000202628 s, 323 MB/s
======= Copying U-Boot image... =======
123+1 records in
123+1 records out
63305 bytes (63 kB) copied, 0.000114554 s, 553 MB/s
======= U-Boot image ready, size: 65536 bytes =======
make[1]: Leaving directory `/home/denver/thinkpenguin/extract/librecmc-u-boot'
real 0m3.658s
user 0m2.643s
sys 0m1.052s
0
Fri Oct 17 11:29:30 EDT 2014
Fri Oct 17 11:29:34 EDT 2014
denver@cherry:~/thinkpenguin/extract/librecmc-u-boot$