Correct \texttt{} commands.
This commit is contained in:
parent
2ab078f9ce
commit
04a297b360
1 changed files with 3 additions and 3 deletions
|
@ -742,9 +742,9 @@ Upon following this procedure, the investigator was able to confirm the
|
||||||
|
|
||||||
Thereafter, the investigator followed the instructions as original specified
|
Thereafter, the investigator followed the instructions as original specified
|
||||||
in ``u-boot\verb0_0reflash''. The investigator configured a TFTP server,
|
in ``u-boot\verb0_0reflash''. The investigator configured a TFTP server,
|
||||||
placed the newly built firmware into \textt{/srv/tftp}. The investigator
|
placed the newly built firmware into \texttt{/srv/tftp}. The investigator
|
||||||
then followed the remaining instructions in ``u-boot\verb0_0reflash'' as
|
then followed the remaining instructions in ``u-boot\verb0_0reflash'' as
|
||||||
written, using the \textt{netcat} console rather than the serial console, and
|
written, using the \texttt{netcat} console rather than the serial console, and
|
||||||
used U-Boot's \texttt{reset} command to reboot the router.
|
used U-Boot's \texttt{reset} command to reboot the router.
|
||||||
|
|
||||||
Upon reboot, the serial console (still connect with working output) showed
|
Upon reboot, the serial console (still connect with working output) showed
|
||||||
|
@ -833,7 +833,7 @@ enforcement organization. However, the following annoyances were discovered:
|
||||||
{\tt netcat} method of installation.
|
{\tt netcat} method of installation.
|
||||||
|
|
||||||
\item Finally, the instructions should note that the new U-Boot firmware
|
\item Finally, the instructions should note that the new U-Boot firmware
|
||||||
should be placed into \textt{/srv/tftp} when using TFTP on most GNU/Linux
|
should be placed into \texttt{/srv/tftp} when using TFTP on most GNU/Linux
|
||||||
desktops.
|
desktops.
|
||||||
\end{itemize}
|
\end{itemize}
|
||||||
|
|
||||||
|
|
Loading…
Reference in a new issue