Copyleft/guide
6
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Correct \texttt{} commands.

Browse source
This commit is contained in:
Bradley M. Kuhn 2014-11-09 15:40:34 -05:00
parent 2ab078f9ce
commit 04a297b360
1 changed files with 3 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
enforcement-case-studies.tex
View file

@ -742,9 +742,9 @@ Upon following this procedure, the investigator was able to confirm the
Thereafter, the investigator followed the instructions as original specified
in ``u-boot\verb0_0reflash''. The investigator configured a TFTP server,
placed the newly built firmware into \textt{/srv/tftp}. The investigator
placed the newly built firmware into \texttt{/srv/tftp}. The investigator
then followed the remaining instructions in ``u-boot\verb0_0reflash'' as
written, using the \textt{netcat} console rather than the serial console, and
written, using the \texttt{netcat} console rather than the serial console, and
used U-Boot's \texttt{reset} command to reboot the router.
Upon reboot, the serial console (still connect with working output) showed
@ -833,7 +833,7 @@ enforcement organization. However, the following annoyances were discovered:
{\tt netcat} method of installation.
\item Finally, the instructions should note that the new U-Boot firmware
should be placed into \textt{/srv/tftp} when using TFTP on most GNU/Linux
should be placed into \texttt{/srv/tftp} when using TFTP on most GNU/Linux
desktops.
\end{itemize}